A two-piece cue travels easily, but its exposed joint and slender shaft need dedicated protection. The case should hold both parts still, avoid tip pressure and match the set's actual length.
Format and length
Measure the shaft and butt from joint to end. A standard cue needs two compartments or a 1/1 tube; keep clearance small so parts cannot rattle. If you use an extension, confirm that it fits the internal tube.
Internal restraint
Soft dividers and caps protect finish and ferrule from contact. In a vertical tube, parts should not drop freely onto the base. With a zip case, check that the slider cannot scrape the shaft while closing.
Material and carrying
Textile cases are lighter for everyday trips; a hard shell handles baggage impacts better. Water-resistant fabric is not a sealed rain container. The strap should carry the case without twisting, and the pocket should fit chalk and a glove.
List every cue component, including a jump or break shaft, before ordering so capacity is not guessed.